Titanium ADVANTiGE™ Processes
T2 Titanium Machining Center Maximizes Productivity in High-Volume, High-Accuracy Titanium Machining
Milling Stability and Process Damping
Temperatures in the Titanium Cut Zone
5-Axis Roughing and Contouring
DEMONSTRATION: Titanium 5-axis Roughing and Contouring
DEMONSTRATION: 5-Axis Roughing Steel
DEMONSTRATION: 5-Axis Roughing Titanium
DEMONSTRATION: 5-Axis Finishing with Long Tool
Makino Products Address the Unique Needs of the Titanium Market
Highly Efficient Machining for Titanium Aerospace Structures
Efficient Machining Solutions in Titanium Alloys
Titanium Process Panel
The Makino Cost ADVANTiGE
Makino’s T-Series Machining Centers with ADVANTiGE Technologies
Test Cuts Demonstrate Benefits of Makino’s ADVANTiGE Technology
Improved Cooling, Lubrication and Chip Evacuation in Titanium Parts with the ADVANTiGE High Pressure, High-Flow Coolant System
Deeper Cuts, Higher Metal Removal Rates and Reduced Tool Wear with ADVANTiGE Active Damping System
Makino’s ADVANTiGE Technology Offers Four Times the Productivity and Double the Tool Life in Titanium Machining
DEMONSTRATION: Deeper Cuts, Higher Metal Removal Rates and Reduced Tool Wear with ADVANTiGE Active Damping System
DEMONSTRATION: Extended Tool Life with Makino’s ADVANTiGE Technologies
Length: 2 min
This video demonstration illustrates the rigidity of the T-Series’ HSK-A125 spindle using a 22 inch long, 1.42 inch diameter high-feed cutter to reach across a part and mill a pocket in Ti-6-4. The process was run at 354rpm with a federate of 31.4ipm and chip load of 0.3 inches per tooth. At an axial depth of 0.02 inch and radial depth of 1.42 inches, a metal removal rate of .92 cubic inches per minute was achieved. Tool life for this finishing process was over 250 minutes.
ADVANTiGE
Radical Departures
T2
T4
Close
Register now to view the Makino ADVANTiGE videos and enjoy full access to the entire library of Makino webinars.
Required
Password must be at least 6 characters
Passwords must match
Invalid Email
SUBMIT
I already have a webinar account.
I do not have a webinar account.
Forgot Password?
Enter your username and your login informaton will be sent to you.
Enter your new password.